Assembling Wall Formworks with TEKO Plastic Formwork Panels
Align the side edge of one TEKO plastic formwork panel with the side edge of the adjacent panel. Align the openings along the panel edges to ensure easy and proper insertion of the handles. After the locking head of the handle passes completely through both panels, rotate the handle to achieve a stable connection between the joined modules.
Fixing to the Base
Erect the formwork onto the base (Fig. 3). Align the formwork and fix it to the base using a 40 × 40 × 45 mm fixing plate (Fig. 1). Alternatively, you can use a wooden board with a thickness of 4 cm (Fig. 2). Secure the board to the base using appropriate fasteners. Fix the formwork in position by nailing wooden pieces across the board. Attention: Do not drive nails into the formwork panels.
Strengthening Walls
Panel struts should be installed at a distance no longer than 180 cm apart. The distance from the end of the formwork (vertical edge or outer corner of the formwork) to the first panel struts should be no more than 90 cm.
Length and Height Compensation up to 5 cm
Use a wooden board or beam (Fig. 5) with the required thickness as an insert to compensate for any shortfall in the length or height of the formwork (Fig. 4). Align the panel with the insert and mark the location of the holes with a pencil. The distance (a) from the edge of the panel to the center of the handle hole shown in Fig. 4 must be equal to the distance (a) from the edge of the insert to the center of the drilled hole shown in Fig. 5. Drill holes with a diameter of 20 mm in the insert. Secure the insert between two adjacent panels (Fig. 4) using an M18x200 bolt, an M18 nut, and 2 washers (Fig. 6).
Stop-End Wall Formwork
Use the elements of the TEKO system for quick and easy end closure of wall formworks (Fig. 7). You can also use beams (А) and boards (В) as shown in Fig. 8.
Assembling Column Formworks
Assemble the column using TEKO plastic formwork panels with a width equal to the column width and External corners (EX). Fix the column to the base and reinforce it with panel struts.
Assembling Column Formworks with External Chamfered Corners
For our TEKO plastic formwork for concrete, we have developed a special external chamfered corner that allows easy and precise construction of columns and wall ends with chamfered edges.
Assemble the column using TEKO plastic formwork panels that are 5 cm narrower than the column width, along with external chamfered corners (EC). Fix the column to the base and reinforce it with panel struts.
Corner Assembling – Wall Thickness in cm
Corner assembling with TEKO plastic formwork allows precise connection of panels for different wall thicknesses, ensuring clean edges, accurate angles and stable formwork structures.
Лек и лесен за монтаж при големи наклони.
Позволява проектирането и изграждането на различни по форма и големина елементи.
ПРОБА
